Table of Contents
Advertisement
Introduction
The implement described in this manual has been
designed with care and built by skilled workers using
quality materials and processes. Proper assembly and
maintenance will provide you with satisfactory use for
seasons to come.
Read this entire manual before attempting to
assemble, adjust or operate this implement.
Failure to comply with this warning can result in
personal injury or death, damage
implement or its components and inferior
operation.
Description of Unit
The Brillion FPS6 Food Plot Seeder is designed with the
versatility to operate under a wide variety of soil and
seeding conditions as well as the ability to plant the
widely varying seed sizes of grasses, legumes and other
mixes and blends. The FPS6 features the Brillion
micro-metering seedbox system to ensure accurate
planting rates. The meters are driven off the rear roller to
allow for constant seed metering regardless of operating
speed. This metering system works very well with smaller
seeds such as clovers, alfalfas and wildlife plot seed
mixtures that are available on the market today.
Using this Manual
This manual will familiarize you with safety, assembly,
operation, adjustment, and maintenance. Read this
manual and follow the recommendations to help ensure
safe and efficient operation.
• The information in this manual is current at time of
printing. Some parts may have changed to assure top
performance.
• Location reference: Right and Left designations in this
manual are determined by facing the direction the
implement will travel during field operation, unless
otherwise stated.
Introduction and Safety Information
DANGER
to the
Owner Assistance
If customer service or repairs are needed, contact your
Brillion dealer. They have trained personnel, parts and
service equipment specially designed for Brillion
products. Your implement's parts should only be replaced
with Brillion parts. If items covered in this manual are not
understood, contact your local Brillion Dealer.
Warranty Registration
Brillion Farm Equipment, by Landoll, shall have no
warranty obligation unless each product is registered,
within 10 days of retail purchase, using the Landoll
Corporation Ag Products on-line registration process.
Please refer to the Ag Products Policy and Procedures
Manual, accessible at
www.landoll.com
instructions regarding product registration.
Enter your product information below for quick reference.
MODEL NUMBER
SERIAL NUMBER
DATE OF PURCHASE
Refer to the ID plate as shown. See Figure 1-1.
Figure 1-1: ID Plate
Chapter 1
for step by step
1-1
Advertisement
Table of Contents
