Upc-E; Enable/Disable Upc-E; Enable/Disable Upc-E1; Enable/Disable Initial Digit Of Upc-E - Inateck BCST-55 Instruction Manual

Enter Setup

UPC-E

Enable/Disable UPC-E

(*) Enable UPC-E Disable UPC-E

Enable/Disable UPC-E1

The initial digit of most UPC-E is "0". If you want to read UPC-E barcodes with initial digit "1",
please first enable the UPC-E and then set the "Enable UPC-E1" barcode. The scanner
defaults disabling the UPC-E1.
Enable UPC-E1 (*) Disable UPC-E1

Enable/Disable Initial Digit of UPC-E

(*) Enable Initial Digit of UPC-E Disable Initial Digit of UPC-E

Convert UPC-E to UPC-A

Convert UPC-E to UPC-A (*) Do not Convert UPC-E to UPC-A

Checksum Code

(*) Transmit UPC-E Checksum Do not Transmit UPC-E Checksum
Exit and Save
35