Code 93 - Inateck BCST-20 Instruction Manual

3.7 Code 93

Decide whether or not to enable Code 93. The BCST-20 Scanner
defaults disable Code 93.
Enable Code 93
(*) Disable Code 93
Note: Read the "Disable Code 93" barcode will make the scanner not
able to read the Code 93 barcode. Thus, if the scanner cannot read
the Code 93 barcode, please try to read "Enable Code 93" to reset.
For Example: Enable Code 93.
1. Read the "Enter Setup" barcode;
2. Read the "Enable Code 93" barcode;
3. Read the "Exit with Save" barcode.
Enter Setup
Exit with Save
Exit without Save
38