Audio Jack Board Cable - HP Spectre x360 Maintenance And Service Manual

Audio jack board cable

Table 5-12 Audio jack board cable spare part information
Description
Audio jack board cable (includes double-sided adhesive)
Before removing the audio jack board cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the audio jack board cable:
1. Release the ZIF connector (1) to which the audio jack board cable is connected, and then disconnect
the audio jack board cable from the system board.
2. Release the ZIF connector (2) to which the audio jack board cable is connected, and then disconnect
the audio jack board cable from the audio jack board.
3. Detach the audio jack board cable (3) from the top cover. (The audio jack board cable is attached to
the top cover with double-sided adhesive.)
4. Remove the audio jack board cable (4).
Reverse this procedure to install the audio jack board cable.
46 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 38).
27).
Spare part number
L95621-001