Audio Jack Board - HP EliteBook x360 1040 G5 Maintenance And Service Manual

Audio jack board

Description
Audio jack board (includes cable)
Before removing the audio jack board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the system board (see
Remove the audio jack board:
1. Remove the Phillips M2.0×2.4 screw (1) that secures the audio jack board to the keyboard/top cover.
2. Lift the left side of the audio jack board (2) until it rests at an angle.
3. Remove the audio jack board and cable.
Reverse this procedure to install the audio jack board and cable.
46 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 28).
System board on page
27).
41).
Spare part number
L41019-001