Fans - HP Spectre x360 Maintenance And Service Manual

Fans

Table 5-17 Fan spare part information
Description
Services the graphics subsystem (includes cable)
Services the processor (includes cable)
Before removing the fan, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the heat sink (see
Remove the fan:
1. Disconnect the fan cables (1) from the system board.
2. Remove the four Phillips M2.0×4.0 screws (2) that secure the fan to the system board.
3. Remove the fans (3).
Reverse this procedure to install the fan.
Bottom cover on page
Battery on page 38).
Heat sink on page 50).
27).
Component replacement procedures
Spare part number
L95630-001
L95631-001
53