Audio Jack Board Cable - HP Spectre x360 Maintenance And Service Manual

13 convertible pc
Hide thumbs Also See for Spectre x360:
Table of Contents

Advertisement

Audio jack board cable

NOTE:
The audio jack board cable is available using spare part number L71959-001.
Before removing the audio jack board cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Disconnect the battery cable from the system board (see
Remove the audio jack board cable:
1.
Release the system board Mylar shield (1) that covers the audio jack board cable.
2.
Release the ZIF connector (2) to which the audio jack board cable is connected, and then disconnect
the audio jack board cable from the system board.
3.
Release the ZIF connector (3) to which the audio jack board cable is connected, and then disconnect
the audio jack board cable from the audio jack board.
4.
Remove the audio jack board cable (4).
Reverse this procedure to install the audio jack board cable.
42
Chapter 5 Removal and replacement procedures
Bottom cover on page
34).
Battery on page
36).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents