Audio Jack Board Cable - HP Spectre x360 13 Maintenance And Service Manual

Audio jack board cable

Description
Audio jack board cable
Before removing the audio jack board cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board (see
Remove the audio jack board cable:
1. Release the ZIF connector (1) to which audio jack board cable is connected, and then disconnect the audio
jack board cable from the system board.
2. Release the ZIF connector (2) to which audio jack board cable is connected, and then disconnect the audio
jack board cable from the audio jack board.
3. Remove the audio jack board cable (3).
Reverse this procedure to install the audio jack board cable.
Bottom cover on page 29).
Battery on page 31).
Component replacement procedures
Spare part number
942832-001
39