Audio Jack Board Cable - HP Pavilion 15 Maintenance And Service Manual

Audio jack board cable

Description
Audio jack board cable
Before removing the audio jack board cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the audio jack board cable:
1. Release the ZIF connector (1) to which audio jack board cable is connected, and then disconnect the audio
jack board cable from the system board.
2. Release the ZIF connector (2) to which audio jack board cable is connected, and then disconnect the audio
jack board cable from the audio jack board.
3. Remove the audio jack board cable (3).
Reverse this procedure to install the audio jack board cable.
44 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 33).
31).
Spare part number
L01848-001