Solid-State Drive - HP Spectre x360 Maintenance And Service Manual

Solid-state drive

Table 5-2 Solid-state drive spare part information
Description
2 TB, M.2 2280, PCIe, NVMe-3×4, SS solid-state drive with TLC
1 TB, M.2 2280, PCIe, NVMe-3×4, SS solid-state drive with TLC
512 GB, M.2 2280, PCIe-3×4, SS solid-state drive with TLC
256 GB, M.2 2280, PCIe-3×4, SS solid-state drive with TLC
1 TB, M.2 2280, PCIe + 32 GB 3D Xpoint solid-state drive
512 GB, M.2 2280, PCIe + 32 GB 3D Xpoint solid-state drive
Before removing the solid-state drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
Remove the solid-state drive:
1. Disconnect the battery cable from the system board.
2. Remove the adhesive cover (1) that secures the solid-state drive shield to the system board.
Bottom cover on page 27).
Spare part number
L85358-005
L85348-005
L85360-005
L85350-005
L85374-005
L85366-005
Component replacement procedures 29