USB/audio jack board (right side)
Description
USB/audio jack board (includes cable)
The USB/audio jack board is located on the right side of the computer. Do not confuse this board with the USB/
card reader/volume board on the left side of the computer.
Before removing the USB/audio jack board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the top cover (see
5.
Disconnect the battery.
To remove the USB/audio jack board:
1.
Remove the Phillips PM2.5×4.0 screw (1).
2.
Remove the two Phillips PM2.0×2.0 screws (2).
Top cover on page
29).
Spare part number
809545-001
Component replacement procedures
37