Install the Access Point
AP310i/e Box Contents
Access Point Installation Options and Accessory Information
Install the Access Point on Drywall or Wood Wall, or to a Solid Flat Ceiling
on page 15
Install the Access Point on a Suspended Ceiling or a Drop Ceiling with a Flat T-
bar
on page 21
Install the Access Point on a Junction Box or Gang Box
Install the Access Point on a Beam
About This Task
The access point is installed on flat surfaces such as drywall or wood wall, solid flat ceiling, suspended
or drop ceiling with T-bar, to beams, or to a junction or gang box. Optional adapters and brackets are
available for mounting the access point to non-flat ceiling tiles and T-bars.
See
purchase order information
Before installing the access point:
Procedure
1. Verify the
2. Visually inspect the access point, the bracket, and any other optional accessories you have ordered
for physical damage.
If there is any damage, contact
3. Read and review the
AP310i/e Box Contents
When you purchase the AP310i or AP310e access point, ensure that the following items are available in
the box:
•
An AP310i/e Quick Reference
•
One access point (AP310i or AP310e)
•
A stainless-steel mounting bracket for 802.11ax indoor access point
on page 13
for details on access points and optional brackets part numbers.
box
contents.
Extreme Networks
safety
guidelines.
on page 28
on page 28
Support.
ExtremeWireless™ AP310i/e Access Points
on page 14
13