Ap310I/E Power Source; Ap310I/E Power Tables - Extreme Networks ExtremeWireless AP310i Installation Manual

AP310i/e Power Source

•
One safety hanger provision
•
One USB 2.0 type A connector
•
Power: PoE at 802.3at and 802.3bt (see
•
Antennas:
◦ AP310i: Four Wi-Fi internal antennas and one BLE internal antenna
◦ AP310e: Four RP-SMA external antenna ports and one BLE RP-SMA antenna
•
Temperature:
◦
AP310i: 0°C to +50°C (32°F to +122°F)
◦
AP310e: -20°C to +55°C (-4°F to +131°F)
•
Enclosure: Plastic
AP310i/e Power Source
Power source
Power over Ethernet (PoE)
PoE out
External 12V DC power supply (optional; ordering
part #37219- PWR 12VDC, 3A, 2.5mm x 5.5mm
connector)
Note
PoE is disabled when external power supply is used.

AP310i/e Power Tables

Table 4: AP310i power table
AP310i
Radio 0 (sensor)
Radio 0 (2.4G)
Radio 0 (5G–L)
Radio 1 (5G–F)
Radio 1 (5G–H)
BLE
USB
PSE
10 ExtremeWireless™ AP310i/e Access Points
AP310i/e Power Source
Description
Power is provided through the 1G Ethernet port of
AP310i/e, compliant to be powered with 802.3at
and 802.3bt to provide full functionality. For
reduced functionality, use 802.3af.
PoE power source is available on GE2 port when
the input power is at 802.3at.
Power is provided through an external DC power
supply plugged into an AC source.
802.3af
2.4G – 2×2 (20dBm)
5G – 2×2 (19dBm)
2×2 (20dBm)
2×2 (18dBm)
2×2 (20dBm)
2×2 (18dBm)
On
Off
Off
Product Overview
for details)
802.3at and DC
2.4G – 2×2 (20dBm)
5G – 2×2 (19dBm)
2×2 (20dBm)
2×2 (18dBm)
2×2 (20dBm)
2×2 (18dBm)
On
On
On