Access Point Installation Options And Accessory Information - Extreme Networks ExtremeWireless AP310i Installation Manual

Access Point Installation Options and Accessory
Information
•
Two Phillips pan head wood screws
•
Two screw-in anchors
Note
All optional brackets and accessories are sold separately.

Access Point Installation Options and Accessory Information

The access point comes with the main mounting bracket (#37201; mounting bracket for 802.11ax indoor
access points). There are various optional brackets, bracket adapters, and accessories that can be
purchased separately.
Table 10: Bracket and accessory usage for various installation options
Mounting
bracket or
accessory
37201; main
mounting
bracket
KT-135628-0
1 accessory;
used with
main
mounting
bracket
30518 WS-
MBI-
DCMTR01
bracket
30516 WS-
MBI-
WALL04
bracket
14 ExtremeWireless™ AP310i/e Access Points
Wall Solid Ceilin Ceiling
instal flat g install
l ceilin install (protruded
g (T- T-bar)
instal bar)
l
Yes Yes Yes Yes, by
adding the
optional T-
bar adapter
to the main
mounting
bracket
No No Yes Yes
No No Yes Yes
Yes No No No
Junctio Beam Ceiling
n box install tile
install protrusio
n
No Yes, by No
adding
the
beam
clip
accessor
y to the
main
mountin
g bracket
No No Yes
No No Yes
Yes No No
Install the Access Point
T-bar Notes
widths
15/16 in. This bracket
is shipped
with the
access
point.
Installation
methods:
Wall mount
or flush
ceiling
mount with
single width.
15/16 in. Wall mount
or
protruded
ceiling
mount with
single width.
9/16 in., Protruded
3/2 in., ceiling
15/16 in. mount with
varying
widths.
No Wall mount
with single
width.
Junction
box
installation.