Panasonic KX-TDE100 Getting Started page 46

4.3 Programming the Virtual Extension Card and IP Telephones
KX-NT265 (software version 2.00 or later only)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Press VOLUME to
select "Network".
To set the subnet mask address
Press VOLUME to
select "Subnet Mask".
To set the default gateway address (if required)
Press VOLUME to
select "Default GW".
To enter the IP address of the IPCMPR card (PBX IP Address)
Press HOLD
twice to return
to the Menu screen.
To end programming
Press STORE.
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and
255.255.255.255)
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
Notes
• IP-PTs can only receive IP addressing information from a DHCP server on its own LAN. Therefore,
when IP-PTs are located on several LANs, a DHCP server is required on each LAN.
46 Getting Started for Virtual IP Cards
VOL
Press SP-PHONE.
1
IP Address*
VOL
Press SP-PHONE.
VOL
Press SP-PHONE.
VOL
HOLD
Press VOLUME
to select "PBX".
The IP-PT will reboot
and establish connection
PROG.
Press PROGRAM
while "Searching" is displayed.
VOL
Press VOLUME to
select "DHCP (Disable)".
Press SP-PHONE.
Subnet Mask Address*
Default Gateway Address*
Press SP-PHONE
twice.
to the network.
Press SP-PHONE
twice.
2
Press SP-PHONE.
3
Press SP-PHONE.
PBX IP
1
Address*
Press
SP-PHONE.
HOLD
Press HOLD
to return to the
Menu screen.