Panasonic KX-TDE100 Getting Started page 44

Pure ip-pbx
Hide thumbs Also See for KX-TDE100:
Table of Contents

Advertisement

4.3 Programming the Virtual Extension Card and IP Telephones
KX-NT321
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
To set the subnet mask address
Select "Subnet Mask".
To set the default gateway address (if required)
Select "Default GW".
To enter the IP address of the IPCMPR card in the Primary PBX (PBX IP Address)
Press HOLD to return
to the Menu screen.
Press SP-PHONE.
To enter the IP address of the Secondary PBX (If required)
Select "Secondary
PBX".
Continued on next page
44
Getting Started for Virtual IP Cards
Press PROGRAM
while "Searching" is displayed.
Press SP-PHONE.
1
IP Address*
Press SP-PHONE.
Press SP-PHONE.
Press SP-PHONE.
Select "PBX".
PBX IP Address*
Press SP-PHONE.
Select "DHCP (Disable)".
Subnet Mask Address*
Default Gateway Address*
Select "PBX IP
Press SP-PHONE.
Address".
1
Press SP-PHONE.
PBX IP Address*
Press SP-PHONE
twice.
2
Press SP-PHONE.
3
Press SP-PHONE.
Press SP-PHONE.
Select "Primary
PBX".
1
Press SP-PHONE.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tde200

Table of Contents