Panasonic KX-TDE100 Getting Started page 33

4.2 Programming the Virtual 16-Channel VoIP Gateway Card
3. a.
From the system menu, click System.
b.
Click Numbering Plan.
c.
Click Main.
d.
Click the Features tab.
e.
In the TIE Line Access box, type the dialling
number.
f.
Click OK.
4. a.
From the system menu, click Private
Network.
b.
Click TIE Table.
c.
In the Own PBX Code box, type the PBX code
of the local PBX in the network.
d.
In the first unused Leading Number box, type
the PBX code of the remote PBX in the
network.
e.
In the corresponding Trunk Group list, select
the number of the trunk group to be used
when making calls.
f.
Set the number modification pattern, if
necessary.
g.
Click OK.
5. a.
From the system menu, click Configuration.
b.
Click Slot.
c.
Move the mouse pointer over the installed V-
IPGW16 card to display the menu of options.
d.
Click Ous.
You will see a confirmation message.
e.
Click Yes.
f.
Move the mouse pointer over the installed V-
IPGW16 card to display the menu of options.
g.
Click Shelf Property.
Getting Started for Virtual IP Cards 33