Panasonic KX-TDE100 Getting Started page 42

4.3 Programming the Virtual Extension Card and IP Telephones
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
Note
To confirm the connection to the secondary PBX after programming, (1) turn the IP-PT's power off,
and (2) hold the STORE button and 2 key while turning the power on.
KX-NT265 (software version 2.00 or later only)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Press VOLUME to
select "Network".
To set the subnet mask address
Press VOLUME to
select "Subnet Mask".
To set the default gateway address (if required)
Press VOLUME to
select "Default GW".
To end programming
Press HOLD to return
to the Menu screen.
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and
255.255.255.255)
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
42 Getting Started for Virtual IP Cards
VOL
Press SP-PHONE.
1
IP Address*
VOL
Press SP-PHONE.
VOL
Press SP-PHONE.
HOLD
Press STORE.
PROG.
Press PROGRAM
while "Searching" is displayed.
VOL
Press VOLUME to
select "DHCP (Disable)".
Press SP-PHONE.
Subnet Mask Address*
Default Gateway Address*
The IP-PT will reboot
and establish connection
to the network.
Press SP-PHONE
twice.
2
Press SP-PHONE.
3
Press SP-PHONE.