4.2 Programming the Virtual 16-Channel VoIP Gateway Card
*1
When "En-bloc" is selected, you need to press "#" after dialling the phone number.
Programming for the Extension Number Method
34
Getting Started for Virtual IP Cards
6.
a.
Click the Outgoing Call tab.
b.
Select the preferred En-bloc Dialling setting
(Overlap (default) or En-bloc
c.
Click OK.
7.
a.
Move the mouse pointer over the installed V-
IPGW16 card to display the menu of options.
b.
Click INS.
a.
1.
Under Configuration, click Slot.
b.
Move the mouse pointer over the white PBX
image of IPCMPR Virtual Slot at the bottom
of the screen.
c.
Click Select Shelf.
d.
Move the mouse pointer over the installed V-
IPGW16 card to display the menu of options.
e.
Click Port Property.
Confirm that all ports are in service (INS).
Note
When a V-IPGW16 card is installed, 8 ports
(1–8) are available. When two V-IPGW16
cards are installed, 16 ports (1–16) are
available.
*1
).