Programming The Virtual Extension Card And Ip Telephones; Assigning The Ip Addressing Information - Panasonic KX-TDE100 Getting Started

4.3 Programming the Virtual Extension Card and
IP Telephones
4.3.1

Assigning the IP Addressing Information

The IP address of an IP telephone, the subnet mask address, the default gateway address, and the IP
address of the IPCMPR card (PBX IP address) must be assigned to the IP telephone before it can be used
on the network. These IP addressing information can be assigned in the following ways;
For IP-PTs
1.
Using a DHCP server when the IP-PT is on the same LAN with the PBX
The DHCP server automatically assigns the IP address of the IP-PT, the subnet mask address, and the
default gateway address to the IP-PT.
The PBX IP address can also be assigned automatically to the IP-PT in process of being registered to
the PBX. For details about registering the IP-PT, refer to "4.3.2 Registering IP Telephones".
2.
Using a DHCP server when the IP-PT is on the remote office LAN
While the DHCP server automatically assigns the IP address of the IP-PT, the subnet mask address,
and the default gateway address to the IP-PT, only the PBX IP address must be assigned manually.
Follow the procedure below to assign the PBX IP address.
KX-NT300 series (except KX-NT321)
To start programming
Supply power to the IP-PT.
To enter the IP address of the IPCMPR card (PBX IP Address)
Select "PBX".
To end programming
Press "STORE".
* Valid IP address range: "1.0.0.0" to "223.255.255.255"
ENTER
The IP-PT will reboot
STORE
and establish connection
to the network.

4.3 Programming the Virtual Extension Card and IP Telephones

SETUP
Press "SETUP"
when it is displayed.
PBX IP Address*
ENTER
Getting Started for Virtual IP Cards 37