Panasonic KX-TDE100 Getting Started page 36

4.2 Programming the Virtual 16-Channel VoIP Gateway Card
*1 When "En-bloc" is selected, you need to press "#" after dialling the phone number.
Note
For details about network parameter settings, refer to the relevant sections of the PC Programming
Manual.
36 Getting Started for Virtual IP Cards
6. a.
Click the Outgoing Call tab.
b.
Select the preferred En-bloc Dialling setting
(Overlap (default) or En-bloc
c.
Click OK.
7. a.
Move the mouse pointer over the installed V-
IPGW16 card to display the menu of options.
b.
Click INS.
*1
).