Panasonic KX-TDE100 Getting Started page 40

4.3 Programming the Virtual Extension Card and IP Telephones
3.
Not using a DHCP server when the IP-PT is on the same LAN with the PBX
Only the PBX IP address can be assigned automatically to the IP-PT in process of being registered to
the PBX. For details about registering the IP-PT, refer to "4.3.2 Registering IP Telephones".
Follow the procedure below to assign the IP address of the IP-PT, the subnet mask address, and the
default gateway address manually.
KX-NT300 series (except KX-NT321)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
To set the subnet mask address
Select "Subnet Mask".
To set the default gateway address (if required)
Select "Default Gateway".
To end programming
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2 Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except 0.0.0.0 and
255.255.255.255)
*3 Valid IP address range: "1.0.0.0" to "223.255.255.255"
40 Getting Started for Virtual IP Cards
ENTER
1
IP Address*
ENTER
ENTER
STORE
Return to the Press "STORE".
Menu screen.
SETUP
Press "SETUP" when it is displayed.
Select "Disable" Select "IP Address".
for DHCP setting.
ENTER
Subnet Mask Address*
Default Gateway Address*
The IP-PT will reboot
and establish connection
to the network.
ENTER
2
ENTER
3
ENTER