Note
For more details about gateway settings, refer to "2.8.11 [1-1] Slot—Virtual IP Gateway Shelf
Property—GW Settings" in the PC Programming Manual.
4.2 Programming the Virtual 16-Channel VoIP Gateway Card
3.
a.
Click DN2IP.
b.
When using the PBX code method:
In the Leading Number box, type the remote
PBX code and starting digit of destination
extension.
When using the extension number method:
In the Leading Number box, type the remote
PBX code and starting digit of destination
extension.
c.
In the Remaining Number of Digits box, type
a number of digits to dial following the leading
number.
d.
In GW No./GW Group Selection, select GW
No.
e.
In the GW No. box, select 1 (the gateway entry
for the destination gateway device at the remote
PBX).
f.
Click OK.
Getting Started for Virtual IP Cards
31