Table of Contents
Advertisement
3.10 PnP/PCI Configuration Setup
This section describes the configuration of PCI (Personal Computer
Interconnect) bus system, which allows I/O devices to operate at
speeds close to the CPU speed while communicating with other
important components. This section covers very technical items that
only experienced users could change default settings.
Init Display First
This item allows you to decide whether PCI Slot or AGP to be the
first primary display card.
Reset Configuration Data
Normally, you leave this item Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup
or if installing a new add-on cause the system reconfiguration a
serious conflict that the operating system can not boot. Options:
Enabled, Disabled.
Resources Controlled By
The Award Plug and Play BIOS can automatically configure all boot
and Plug and Play-compatible devices. If you select Auto, all
interrupt request (IRQ), DMA assignment, and Used DMA fields
Phoenix-Award BIOS Utility
IPC910H Series User's Manual
49
Advertisement
Table of Contents
Need help?
Do you have a question about the IPC910H Series and is the answer not in the manual?
Questions and answers