Transfer Results Using Bluetooth - VeEX FX87 User Manual

Only one row at a time can be moved.
A row can be moved to another group only if there is no measurement with that
wavelength in the group.
To save the measurement results to the PC, click the [Save to PC] button ( , see it, for example,
in the Figure above).
To erase all test results from the FX87 memory, go to the Hardware tab and click the [Erase all
memory] button ).

9.2.2 Transfer Results Using Bluetooth

To transfer measurement results to the PC using Bluetooth, change |MODE| until Read screen
is shown. The Bluetooth symbol ( ) should appear on the upper right-hand corner. Initiate
pairing through the host device's operating system settings (Windows PC), before opening
LTSync application.
FX87 is paired to Windows PC Settings, data transfer to LTSync is ready to initiate
Then open the LTSync application with the FX87 device nearby, click on the Bluetooth symbol
and wait until Bluetooth is highlighted in orange.
To get the measurement results onscreen, click the Download button
a table, as shown in the figure below.
FX87 DWDM Tunable Laser Source User's Manual
. Results will appear in
Page 30 of 39