Table of Contents
Advertisement
3. Press
|Up|
and
4. Press
|MODE|
pressing
|Up|
and |Down|.
5. Press
|Shift/Enter|
6.3
Resetting FX87
On rare occasions resetting the FX87 device may be needed. To do this:
1. Disconnect external power supply from the device;
• With device OFF, press the red
The FX87 will reboot. Set the date and time after every reboot (see Section
Setting Date and
Because of the reset, the reference values will be lost, so set these values again
and also perform ZERO level operation (see Section
The reset DOES NOT erase any previously stored measurement data.
FX87 DWDM Tunable Laser Source User's Manual
|Down|
to select the parameter to edit.
to select the field to edit, then change the value if necessary, by
to save the date and time settings.
|Power|
Time).
button and hold it for at least 15 seconds.
8.2.1. Setting ZERO
6.2.
Level).
Page 12 of 39
Advertisement
Table of Contents
