Table of Contents
Advertisement
FX87 as a Tunable Light Source
DWDM LS: use this mode to generate optical signal of a specified wavelength within the
operating range (1527.60 – 1566.31 THz, incremented by 50GHz/100GHz spacing).
To use FX87 as a light source, connect the fiber to the OLS port located on the left on the top
panel of the device. Then press the
|MODE|
button until the DWDM LS mode appears at the
upper left corner of the display. To toggle between Laser: ON and Laser: OFF, press the
|F1|
(ON/OFF) button. When the laser is on, the Channel # and its wavelength is shown onscreen:
DWDM Light Source mode
To select the necessary channel, press the
|F2|
(CHANNEL) button, scroll up or down with the
help of the
|Up|
and
|Down|
buttons, make selection, and confirm it by pressing |Shift/Enter|.
FX87 DWDM Tunable Laser Source User's Manual
Page 13 of 39
Advertisement
Table of Contents
