Measurement results are presented as a table
To prepare measurement results for a report, enter the pertinent information into the fields in the
Attributes section (see, for example, the Figure above).
The displayed results can be filtered by the test group and/or wavelength by selecting the desired
results to be worked with, in the main viewing area (see, for example, the Figure above).
To download results of a certain period, go to the Hardware tab and select the [Load results
for period] checkbox. This brings (see the Figure below).
Filtering measurement results by time
To delete a row of results, select its checkbox, then click the [Delete row] button ( , see it, for
example, in the Figure above). Several rows of test results can be selected and deleted at the
same time.
To move a row to another group, highlight the row by clicking it, after which the border around
the row will turn orange. Drag-and-drop this row to another group if needed. Alternatively,
highlight the row, click the [Move row] button ( , see it, for example, in the Figure above), then
highlight the desired group.
FX87 DWDM Tunable Laser Source User's Manual
Page 29 of 39