Table of Contents
Advertisement
Downloading Measurement Results
to PC
To transfer test results and create a measurement report, first install the LTSync PC software
available for download on VeEX customer portal. New users will have to fill in a registration
details about customer information and device usage and to be approved by administrator.
Upon entering login credentials, the website will flash and navigate to VeEX customer portal
page. Go to the
Functions
>Fiberizer
LTSync.
For detailed operations with the applications, please refer to their corresponding manuals. More
information on Fiberizer Cloud and LTSync can be found at the VeEX website
(www.veexinc.com).
9.1
Installing the FX8x USB Driver
A digitally signed Windows USB driver is required for connecting to the FX8x series. The driver
is embedded in the LTSync software and will install automatically in the background when the
software is installed. If for any reason, the USB driver installation fails, it may be necessary to
install the driver manually. In such event, please follow the procedure below.
If the operator has used FX-4x series and FX-8x series optical power meter with
LTSync to download results on the current PC system in the past, then this step
can be ignored.
FX87 DWDM Tunable Laser Source User's Manual
sidepane and look for
VeEX Customer Portal Software Releases Webpage
Secured Releases->Fiberizer Tab-
Page 25 of 39
Advertisement
Table of Contents
