Advertisement
Cable Cubby Drawer CCD 220 and CCD 320
Installation Checklist
Planning (page 1)
…
Check with local and state regulations before starting the installation
…
Check all parts and equipment before installation
Preparing the Table (page 3)
…
Determine the best location for the Cable Cubby Drawer
…
Reposition the Cable Track if necessary
…
Pre-drill mounting holes for the Cable Cubby Drawer
Preparing the Cable Cubby Drawer (page 8)
…
Disassemble the AAP frame from the Cable Cubby Drawer
…
Assemble the AAP modules to the AAP frame
…
Install populated AAP frame onto the Cable Cubby Drawer
…
Mounting the power supply to the Cable Cubby Drawer (Optional)
…
Customize the Front Facade (Optional)
Cable Management (page 9)
…
Manage the Cables from the Cable Cubby Drawer under the Table
…
Move the slide forwards and backwards to ensure no resistance
Mounting the Cable Cubby Drawer under the Table (page 10)
…
Install screws and hang the Cable Cubby Drawer under the table
…
Open and close the drawer to ensure no cable binding or resistance.
…
Secure the Cable Cubby Drawer
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the
Extron Safety and Regulatory Compliance Guide
on the Extron website.
© 2019 Extron Electronics — All rights reserved.
All trademarks mentioned are the property of their respective owners.
•
Installation Guide (Continued)
B
U S
D IO
A U
A
V G
M I
H D
E R
R G
H A
B C
U S
www.extron.com
68-3488-50 Rev. A
12 19
Advertisement
