Advertisement
Installation Checklist
Planning (see page 1)
Check with local and state regulations before starting the installation
…
Check all parts and equipment before installation
…
Preparing the Cable Cubby F55 UT (see page 3)
Check modules for adaptability and installation requirements
…
Installing Modules into the Cable Cubby F55 UT (see page 4)
Install half-, single-, and double-size modules into the Cable Cubby F55 UT
…
…
Remove any supports if necessary
Use tie wraps to manage cables to the enclosure
…
Preparing the Table (see page 5)
Determine the best location for the Cable Cubby F55 UT
…
…
Pre-drill mounting holes for the Cable Cubby F55 UT
Mounting the Cable Cubby F55 UT (see page 6)
…
Install screws and hang the Cable Cubby F55 UT under the table
Secure the Cable Cubby F55 UT
…
Removing Modules from the Cable Cubby F55 UT (see page 7)
…
If needed, remove modules from the Cable Cubby F55 UT with the provided pry tool
For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics,
Extron Safety and Regulatory Compliance Guide
see the
8
©2022 Extron — All rights reserved.
All trademarks mentioned are the property of their respective owners.
Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876
on the Extron website.
www.extron.com
68-3557-50 Rev. A
06 22
Advertisement
