North American Emissions Compliance; Complementary Information - Distech Controls ECLYPSE Installation Manual

North American Emissions Compliance

United States
Changes or modifications not expressly approved by Distech Controls could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential and commercial installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Canada
This Class (B) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe (B) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

Complementary Information

The ECY-8DOR, ECY-8DOR-HOA, and PS100-240 modules are designed for type 1 action and type 1.b action. The ECY-8DOR and ECY-8DOR-HOA
presents an A class software. The EMC immunity test passed using 230 VAC and 0.5 A. The Ball pressure Test temperature was 167°F (75°C) for the
Enclosure and 257°F (125°C) for the Connectors. The SELV must not exceed 42 VDC. The maximum accessible voltage is 19 VDC. All connecting ca-
bles must be permanently installed with X-type anchors. All cables must have insulation rated for 176°F (80°C) or higher. These products are classified
as integrated electronic operation control devices. SELV is guaranteed by reinforced insulation.
For the PS100-240 module: Risk of electric shock. Do not open. This product has no user-serviceable parts
inside. When power has been disconnected, dangerous residual internal voltages may still be present. Return
this unit to Distech Controls for maintenance or repair.
Distech Controls, the Distech Controls logo, Innovative Solutions for Greener Buildings, EC-Net, ECO-Vue, Allure, and Open-To-Wireless are trademarks of Distech Controls Inc.; LonWorks, LON, and
LNS are registered trademarks of Echelon Corporation; BACnet is a registered trademark of ASHRAE; BTL is a registered trademark of the BACnet Manufacturers Association; Niagara
registered trademark of Tridium, Inc.; EnOcean is a registered trademark of EnOcean GmbH. All other trademarks are property of their respective owners.
Global Head Office - 4205 place de Java, Brossard, QC, Canada, J4Y 0C4 - EU Head Office - ZAC de Sacuny, 558 avenue Marcel Mérieux, 69530 Brignais, France
22 / 22
Specifications subject to change without notice.
©, Distech Controls Inc., 2015 - 2018. All rights reserved.
AX
Framework is a
ECY-CSC_IG_23_EN