Step 6: Remove The Packing Materials - Roland VersaUV LEJ-640 Setup Manual

3. Assembling and Installing

Step 6: Remove the Packing Materials

Tape and other packing materials are attached to the machine to protect it from vibration during transporta-
tion. When the installation is complete, remove these materials.
 Remove all packing materials. Any that remain may cause faulty operation or breakdown when the power
is switched on.
 Store the packing materials carefully, because they are needed again when transporting the machine for
relocation or the like.
The packing material
attached.
34
Peel off the tape.
Remove
can be stored in the location shown in the figure using the screw that was previously
Peel off the tape.
Remove
Under side of the
machine
Packing material