3. Assembling and Installing
4.
Attach the paper tube.
Pull the dancer roller back toward you.
Loosen the arm retaining screw.
Set the paper tube on the end cap on the stand leg (right) securely.
Press the end cap on the arm to the paper tube, and set it in securely.
As shown in the figure, press down the top of the arm with your hand and tighten
the arm retaining screw.
End cap
For the paper tube, use the included item. Using something other than the included item may result
in spinning without traction or other problems that impede media take-up.
26
Dancer roller
Tighten the screw while
pressing down from above.
Arm retaining screw
Fit onto this
securely.
Paper tube
OK
Not
OK
End cap
Fit onto this
Paper tube
securely.