Table of Contents
Advertisement
6. Removing the Packing Materials 2
Remove the Packing Materials From the Base Section
Tape and packing materials are attached to the machine to protect it from vibration during transportation. When
installation is complete, remove them.
CAUTION
Remove all packing materials. Any that remain may cause faulty operation or breakdown when the power is
switched on.
Store the packing materials carefully, because they are needed again when transporting the machine for relo-
cation or the like.
32
Be sure to remove the tape and packing materials according to the procedure.
Failure to follow the procedures may cause sudden operation or the like of the machine,
which may result in unexpected injury.
SERVO ON
F 1
F 2
F 3
F 4
F 5
F 6
Switch on the main power.
Main power
Press the SERVO ON to switch on the sub
power.
Use
to raise the lifter to the top.
Advertisement
Table of Contents
