Step 3: Remove The Packing Materials - Roland VersaUV LEF-12 First Step Manual

Before Using This Printer

STEP 3: Remove the Packing Materials

Tape and packing materials are attached to the machine to protect it from vibration during transportation.
When installation is complete, remove these.
WARNING
 Remove all packing materials. Any that remain may cause faulty operation or breakdown when the power
is switched on.
 Store the packing materials carefully, because they are needed again when transporting the machine,
such as for relocation.
You can store packing materials in the location indicated in the illustration. Attach to the machine using the
screws previously attached to the packing materials.
Inside
24
Carry out these operations before you connect the power cord.
Inadvertent powerup may result in pinched hands or other injury.
Retainer B
Retainer B
Retainer A
Retainer A