Remove The Packing Materials - Roland VersaCamm SP-540V Setup Manual

3. Assembling and Installing

Remove the Packing Materials

Tape and packing materials are attached to the machine to protect it from vibration during transportation. When
installation is complete, remove these.
Remove all packing materials. Any that remain may cause faulty operation or breakdown when the power is
switched on.
Store the packing materials carefully, because they are needed again when transporting the machine for relo-
cation or the like.
3 ) Remo ve the packing
and peel off the ta
You can attach the removed packing material at the location shown in the figure for storage.
22
1 ) Remo ve the packing.
Then open the fr ont co ver.
4 ) Remo ve the r etainer .
pe.
2 ) Remo ve the packing
inside the fr ont co ver.
5 ) Remo ve the packing.
Then close the fr ont co ver.