Step 4: Remove The Packing Materials - Roland VersaCamm VS-640i Setup Manual

3. Assembling and Installing

Step 4: Remove the Packing Materials

Tape and other packing materials are attached to the machine to protect it from vibration during transporta-
tion. When the installation is complete, remove these materials.
WARNING
 Remove all packing materials. Any that remain may cause faulty operation or breakdown when the power
is switched on.
 Store the packing materials carefully, because they are needed again when transporting the machine for
relocation or the like.
Procedure

Remove all the packing materials.
Remove the retainer and the packing material.

Attach the removed retainer of
28
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Packing
material
at the location shown in the figure for storage.
Bolt removed in step
Retainer
Bolt
Packing material