Roland VersaUV LEJ-640 Setup Manual page 56

6. Network Settings




Click [OK] in the [Internet Protocol Version 4 (TCP/IPv4) Properties] dialog box, click
[Close] in the [Ethernet Properties] dialog box (the [Local Area Connection Properties]
dialog box on Windows 7), and then click [Close] in the [Ethernet Status] dialog box
(the [Local Area Connection Status] dialog box on Windows 7).
54
Click [Properties].
The [Ethernet Properties] dialog box appears. (On Windows 7,
the [Local Area Connection Status] dialog box appears.)
If the [User Account Control] dialog box appears, click [Continue].
Select [Internet Protocol Version 4 (TCP/IPv4)], and
then click [Properties].
If the [Internet Protocol] check box is clear, select it.
The [Internet Protocol Version 4 (TCP/IPv4) Properties] dialog
box appears.
Select [Use the following IP address]. Enter the infor-
mation as shown below, and then click [OK].
Item Address to enter
IP address
Subnet mask
Here, "XXX" can be any number from 1 to 254. However, be sure
to specify a number that is different from the numbers used for
other computers and devices.
192.168.0.XXX
255.255.255.0