Removing The Packing Materials - Roland VersaArt RS-640 Setup Manual

3. Assembling and Installing

Removing the Packing Materials

Tape and packing materials are attached to the machine to protect it from vibration during transportation. When installation
is complete, remove these.
 Remove all packing materials. Any that remain may cause faulty operation or breakdown when the
power is switched on.
 Store the packing materials carefully, because they are needed again when transporting the machine
for relocation or the like.
You can attach the removed packing material at the location shown in the figure for storage.
30
Tape
Packing
Remove the packing.
Packing
Remove the packing.
Retainer
Remove the Retainer.