Step 5 : Remove The Packing Materials - Roland SOLJET PRO4 XF-640 Setup Manual

3. Assembling and Installing

Step 5 : Remove the Packing Materials

Tape and other packing materials are attached to the machine to protect it from vibration during transporta-
tion. When the installation is complete, remove these materials.
WARNING
 Remove all packing materials. Any that remain may cause faulty operation or breakdown when the power
is switched on.
 Store the packing materials carefully, because they are needed again when transporting the machine for
relocation or the like.
Procedure

Remove all the packing materials of

Attach the removed packing material of
30
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
.
at the location shown in the figure for storage.
Bolt removed in step .