Roland VersaUV LEJ-640 Setup Manual page 26

3. Assembling and Installing
2.
Attach the Rail Slider and the Arm to the Stand Legs.

Attach the arm to the rail slider.
Secure the arm with the arm retaining screw.
Arm

Align the slot on the rail slider with the tab on the stand leg.
Loosely tighten the bolts in the 2 location shown in the figure.
Loosely tighten the bolt on the stand leg (right) first.
Fully tighten all the loosely-tightened bolts.
Please use the head-unit tool.
24
Arm retaining screw
Bottom surface
of the rail slider
Slot
Line up the tab
with the slot.
Tab
Rail slider
Head-unit tool
Bolt
Orient this side
toward the rear.
Hexagonal
wrench