Removing The Packing Materials - Roland Advanced Jet AJ-1000i Setup Manual

3. Removing the Packing Materials

Tape and packing materials are attached to the machine to protect it from vibration during transportation. When installation
is complete, remove these.
CAUTION
 Remove all packing materials. Any that remain may cause faulty operation or breakdown when the
power is switched on.
 Store the packing materials carefully, because they are needed again when transporting the machine
for relocation or the like.
Packing material A
24
Perform this task with all power switches left switched off.
Otherwise sudden movement of the machine may cause injury.
Packing material C Packing material D
Packing ma-
terial B
Peel off the tape.