8.3 Temporary override mode
When thermostat is running schedule mode we can temporarily override it by setting new setpoint temperature.
1
Use
or
buttons to
change setpoint temperature.
PLEASE NOTE: To cancel temporary override mode and go back to the schedule hold
icon indicates that thermostat went back to schedule mode.
8.4 Standby mode
STANDBY mode is a special setpoint temperature which can be activated/deactivated in any time. It can work like a frost protection or overheating
protection when needed. When standby mode is activated the clock continues running, as well as the temperature sampling. To enter STANDBY mode
hold the
button for 3 seconds on your thermostat. You can always turn off STANDBY mode by holding the
1
8.5 Key lock function
To LOCK/UNLOCK SQ610RF Quantum thermostat keys in OFFLINE MODE you have to press and hold
thermostat is locked you will see padlock icon on the display. When thermostat is unlocked padlock icon is not visible.
1
3 sec.
3 sec.
2
Confirm by
2
3 sec.
2
3
Calendar with hand icon means that
button.
schedule has been overwritten until next
schedule program.
button for 3 seconds. The calendar
3
3 sec.
button for 3 seconds again.
+
buttons for 3 SECONDS. When
55