Temporary Override Mode; Boost Mode (Hourly Temperature Override Mode) - Salus RT510 Full User Manual

6.3 Temporary override mode

This function is available only in schedule mode (AUTO). If a new setpoint temperature will be set during the schedule - it will be maintained until next
time interval starts according to programmed schedule.
1
SET
SELECT
SELECT SET
Temporary Override mode will be disabled when new schedule will be set.

6.4 Boost mode (hourly temperature override mode)

This function is available in schedule and manual mode. It is used to change the setpoint temperature for a specified number of hours (up to 9 hours). Once
that time is over, thermostat returns to previous mode. To set this mode please follow steps below:
1
hours for temperature override (e.g.
3
To turn off hourly temperature override mode before time's up, press the + Hr button until number of hours disappears from display.
14
TEST / PAIRING
SELECT SET
Using or buttons set new
setpoint temperature during active
schedule.
TEST / PAIRING
TEST / PAIRING
SELECT SET TEST / PAIRING
Press +Hr button to set number of
to set up override for 3 hours, press
the button 3 times).
TEST / PAIRING
SELECT SET
Press SET button to confirm.
2
After new setpoint temperature set,
thermostat will return to the main
screen and it will temporary override
2
Using
setpoint temperature for hourly
temperature override mode.
SELECT SET
TEST / PAIRING
SELECT SET
4
Thermostat will work for the set
period of hours. After that it will
switch back to the previous mode.
TEST / PAIRING
SELECT SET
the schedule.
SELECT SET TEST / PAIRING
or button set a new
TEST / PAIRING
TEST / PAIRING
SELECT SET