4.3 Li-on battery charging
New SQ610RF Quantum thermostat is partially charged, however, we recommend you to fully charge the battery before use.
Connect charger to micro-USB port which is at the bottom of SQ610RF Quantum thermostat to charge the device.
4.4 First power up sequence, language choice and preparing to the pair process
1
For more information
scan this code or visit:
www.salus-controls.com
MENU /
Press for 3 sec
to POWER UP
Remove the protection foil
4
10
Charging to full battery level may take up to 24h maximum.
2
3 sec
To power on the thermostat hold
...then thermostat will display the
software version.
3 sec
button for 3 seconds...
5
Now, choose your language by
„
Confirm your language by tick button.
3
...display will show all icons...
" or „
" buttons.