Before You Start (First Power Up); Lcd Icon Description; Button Functions - Salus QUANTUM SQ610RF Full User Manual

4. Before you start (first power up)

4.1 LCD icon Description

20
19
18
17
16
1. Menu/Settings description + Clock
2. AM/PM
3. Temperature unit
4. Heating indicator (icon is animating when there is heating demand)
5. Cooling indicator (icon is animating when there is cooling demand)
6. RF Connection indicator
7. Internet conection indicator
8. Occupancy sensor (hotel card)
9. Key lock function
10. Standby mode icon
4.2 Button Description
Button Description
Button Function
1) Menu button / Return button.
2) In the MAIN SCREEN: Press and hold for 3 sec to change the thermostat operating mode
(Schedule mode / Manual mode).
3) In the SETTINGS SCREEN: Press and hold for 3 sec to go back without saving the changes.
4) In the PAIRING SCREEN (in SYSTEM TYPE Menu): Press and hold for 3 sec to see other pairing options.
„Down" Button (Decrease parameter value/moving on the menu in 'DOWN' direction)
"Up" Button (Increase parameter value/moving on the menu in 'UP' direction)
1) Press and hold for 3 seconds to POWER UP new device
2) "OK / Tick" Button (Confirm parameter value / Go to the next menu / Save settings)
3) In the MAIN SCREEN: Press and hold for 3 seconds to enter Standby mode
4) In the SETTINGS SCREEN: Press and hold for 3 sec to go back to the MAIN SCREEN & SAVE all the changes.
5) During PAIRING process – hold button for 3 seconds to POWER OFF or REBOOT the thermostat.
In the MAIN SCREEN - press and hold these buttons together for 3 seconds to LOCK / UNLOCK the thermostat keys.
+
Unlock – do the same action again).
15 14 13 12 11 10
1
2
3
4
5
6
7
9 8
11. Current Temperature / Setpoint Temperature
12. Holiday mode
13. Temporary override mode
14. Settings icon
15. Baterry indicator
16. External / Floor temp sensor indicator
17. Schedule program number
18. Schedule mode icon
19. Day indicator/ SET information
20. Humidity Display
9