8. OPERATING in OFFLINE MODE:
8.1 Setpoint temperature change (manual mode)
SQ610RF Quantum thermostat is in manual mode by default. To change setpoint temperature please look at the steps below.
1
Use
or
buttons to set
temperature.
Active HEATING (or COOLING) is indicated by animating flame (heating) or snowflake (cooling).
2
Confirm by
button.
PLEASE NOTE:
If you want to switch between schedule mode and manual mode you
have to press
button for 3 seconds on the main screen.
3
Thermostat will go back to the
main screen.
53