5.6 Pairing with RX10RF receiver
Please note:
For easier installation, please make sure you have already added RX10RF receiver to your ZigBee network (please refer to the RX10RF receiver manual
instruction).
1
Choose language by„
buttons. Confirm by
4
Open main menu.
7
Press „Scan for equipment" button.
2
" or „
"
Now thermostat is looking for the
button.
signal from the coordinator...
5
8
Select „Settings".
App has started scanning...
3
SALUS
SmartHome
Go to SALUS Smart Home app
6
Now enter to the „Setup Equipment".
9
...Gateway has started flashing red and
searching for the thermostat...
Thermostat is connected. Go to the
Smart Home app to configure it.
21