Assembly
Information
4.3.2.1. Multi-turn actuator with output drive types B: mount to valve/gearbox
16
Figure 9: Output drive type B
[1]
Multi-turn actuator flange (e.g. FA07)
[2]
Hollow shaft
[3]
Output drive sleeve (illustration examples)
[3] B/B1/B2 and [3]* B3/B4, respectively with bore and keyway
[4]
Gearbox/valve shaft
Spigot at valve flanges should be loose fit.
Figure 10: Mounting output drive types B
[1]
Multi-turn actuator
[2]
Valve/gearbox
[3]
Valve/gearbox shaft
1.
Check if mounting flanges fit together.
2.
Check, if output drive of multi-turn actuator [1] matches the output drive of
valve/gearbox or valve/gearbox valve shaft [2/3].
SAEx 07.2
SAEx 16.2 / SAREx 07.2
SAREx 16.2